Posted in

What are the vibration and shock requirements for an Electronic Module?

When I first started as an electronic module supplier back in 2012, I used to think vibration and shock testing was just another box to tick—something that clients required for their product certifications, but not really a core part of what made our modules stand out. That all changed when one of our key customers, a manufacturer of heavy-duty construction equipment, recalled 1,200 units because our power management module had failed on-site. The issue wasn’t that our module broke immediately; it was that repeated vibration from the machine’s engine and hydraulic systems had loosened a solder joint on the microcontroller, leading to intermittent connectivity. That day, I realized vibration and shock requirements aren’t just technical specs—they’re the backbone of reliable electronic modules in real-world use. For anyone in the market for electronic modules, understanding these requirements isn’t just about meeting standards—it’s about ensuring their end product doesn’t leave them scrambling for recalls or field repairs. Electronic Module

Let’s start with the basics: what are vibration and shock requirements, exactly? In simple terms, they define the environmental stressors an electronic module must withstand without degradation in performance, functionality, or lifespan. Vibration is a constant, cyclic stress—think a car engine idling, a wind turbine blade spinning, or a ship navigating rough seas. Shock is a transient, high-magnitude stress—like a forklift dropping a component, a military vehicle firing a cannon, or a drone crashing. For our modules, which go into everything from agricultural tractors to industrial control systems, ignoring these requirements would mean our products fail when they’re needed most. But here’s the thing: one size doesn’t fit all. A module for a consumer smartwatch has way different vibration and shock needs than one for a offshore oil rig’s monitoring system. That’s why as a supplier, we don’t just quote a generic test spec—we work with each client to tailor requirements to their specific application.

First, let’s break down vibration requirements, because this is the stress our modules encounter most consistently. Vibration is measured in frequency (Hertz, Hz) and acceleration (usually in g-force, where 1 g = 9.81 m/s², the acceleration due to gravity). The key here is resonant frequency—every electronic module has a natural frequency where it’s most likely to vibrate excessively, which can cause internal components to rub, solder joints to fatigue, or circuit boards to crack. For example, a module in a small industrial pump might vibrate at a constant 60 Hz with 2 g of acceleration, while a module in a heavy truck’s cab might experience a vibration sweep from 10 Hz to 2,000 Hz at up to 5 g. The standard tests we use at our facility are based on international norms like IEC 60068-2-6, which outlines procedures for measuring vibration resistance. But we don’t just run the test once. We run vibration for extended durations—sometimes 48 hours straight—to simulate months of real-world use. A few years ago, a client making a farm combine wanted a module that could survive 100 hours of vibration at 15 Hz and 3 g. Our initial prototype passed, but we noticed a subtle shift in its resonant frequency after 80 hours. We redesigned the module’s internal mounting brackets, shifting the resonant frequency away from the combine’s engine’s operating frequency, and the final product went on to have zero field failures in three years of use. That’s the difference between checking a box and understanding vibration’s real-world impact.

Shock requirements, on the other hand, are the “extreme event” specs. Shock is typically measured in peak acceleration, pulse duration, and often the shape of the shock pulse (like a half-sine, trapezoidal, or sawtooth pulse). For consumer electronics, shock might be a 10 g pulse lasting 11 ms—enough to drop a phone on a table. But for military applications, shock can be 1,000 g lasting just 1 ms, from a nearby explosion. For our modules, we most commonly deal with shock from handling during manufacturing, transportation, or end-use. For example, a module that’s part of a forklift’s weight sensor might experience shocks of up to 50 g from loading pallets, while a module shipped to a remote construction site might be subjected to 20 g shocks from being handled by cranes. The standard test for shock is IEC 60068-2-27, which specifies a range of pulse types and magnitudes. But here’s a common misconception: a module that passes a 50 g shock test in a lab might still fail in the field if the shock is applied along the wrong axis. Electronic modules have three axes (X, Y, Z), and shocks applied along the axis where a critical component is mounted (like a high-power transistor on the top of the circuit board) are far more likely to cause damage. That’s why we test modules along all three axes, not just the one that looks easiest. A client in the material handling industry once came to us with a module that was failing after just a few weeks in their products. We ran shock tests along all three axes, and found that shocks along the Z-axis (vertical, from lifting heavy loads) were causing the circuit board to flex too much, leading to solder joint cracks. We added a reinforcing spacer between the circuit board and the module’s housing, and that simple change cut failure rates by 90%.

Now, the tricky part: aligning vibration and shock requirements with actual application needs. Too often, clients rely solely on industry standards without considering their specific use case. For example, a company making a food processing machine might use a standard IEC spec, but their machine operates 24/7 in a factory with high-frequency vibration from nearby conveyor belts. If they use a module that only meets a 10-hour vibration test, it will fail quickly. As a supplier, we work with clients to map out their end product’s operating environment first. We ask questions: Where will this module be used? What’s the power source? How is it handled during shipping and installation? For a module going into a satellite, the requirements are extreme: vibration during launch can reach 1,000 g, and vibration from solar panel deployment can be 20 g. For a module in a smart thermostat, requirements are much lower—usually 2 g of vibration and 5 g of shock. We also consider the module’s internal design: components like surface-mount devices (SMDs) are more resistant to vibration than through-hole components, but larger components (like capacitors or inductors) can be a weak point if not mounted correctly. At our facility, we use finite element analysis (FEA) software to model how our modules will respond to vibration and shock before we even build a prototype. This helps us catch design flaws early, which saves time and money for both us and our clients.

Another important factor is the difference between functional performance and structural integrity. A module might survive a vibration test structurally, but still experience functional issues—like intermittent signal loss or inaccurate sensor readings. For example, a module with a vibration-prone microcontroller might have a structural pass, but the microcontroller’s clock speed could fluctuate, leading to errors in data processing. That’s why our testing doesn’t just check if the module doesn’t break; we also test its functionality continuously during vibration and shock. We connect the module to a test bench that monitors voltage, current, signal output, and data processing while the module is undergoing stress. This means if a client’s module needs to maintain a 0.1% accuracy in temperature readings during vibration, we test that accuracy in real time. I remember a client making wind turbine sensors who once told us their old supplier’s modules “passed all the tests” but would give inaccurate wind speed data during high winds. When we ran their module on our test bench, we saw that vibration was causing the sensor’s analog-to-digital converter (ADC) to have noise—even though the module’s structure was fine. We redesigned the ADC’s filter circuit to reduce noise, and now their sensors perform accurately even in Category 5 wind conditions. That’s the value of functional testing, not just structural testing.

Now, let’s talk about common pitfalls we see clients make when defining vibration and shock requirements. First, under-specifying for real-world use. We once had a client in the heavy truck industry who specified a vibration requirement of 5 g, but their trucks’ engine actually vibrated at 8 g. Their modules failed at a rate of 25% in the first year, and they had to rework their entire supply chain. Second, over-specifying, which drives up cost unnecessarily. A consumer electronics client once tried to specify a 20 g shock requirement for a module that only needed 8 g. The extra testing and material costs added 30% to the module’s price, and since the product was for a budget line, that made it uncompetitive. Third, ignoring environmental interaction. A module used in a coastal ship might deal with corrosion, which weakens components and makes them more vulnerable to vibration. If the module only meets a standard vibration test without considering corrosion, it will fail faster. At our company, we incorporate environmental stress testing (like humidity and salt spray) alongside vibration and shock to ensure our modules hold up in combined stressors. This is something we’ve seen many suppliers skip, but it’s critical for long-term reliability.

So, what does this mean for you, as someone looking for an electronic module? First, don’t just rely on your supplier to tell you the requirements. Understand your end product’s environment: is it in a moving vehicle, a factory floor, a remote location? What kind of shocks will it face—handling, drops, or extreme events? Second, ask your supplier about their testing process. Do they test functionality during vibration and shock? Do they test along all three axes? Do they account for combined environmental stress? Third, don’t settle for generic specs. A good supplier will work with you to tailor requirements, not just quote a standard test. For us, that’s been our biggest competitive advantage: we don’t just sell modules—we solve reliability problems.

Looking ahead, vibration and shock requirements are only going to get more important as electronic modules are used in more extreme environments. We’re seeing growth in modules for electric vehicles (which have high-frequency vibration from electric motors), autonomous drones (which face shock from takeoff and landing), and deep-sea exploration (which has constant vibration from underwater currents and extreme shock from pressure changes). At our facility, we’re investing in new test equipment—including a multi-axis vibration shaker that can test up to 10,000 Hz, and a shock machine that can simulate up to 2,000 g. We’re also partnering with clients to develop custom testing protocols for their specific applications, because we know that one size will never fit all.

If you’re in the market for an electronic module that can stand up to real-world vibration and shock, and you’re tired of suppliers who just check boxes, we’re here to help. We’ve worked with hundreds of clients across industries, from consumer electronics to industrial equipment, and we can help you define the right requirements, test your prototype, and deliver a module that works reliably when it matters most. We’ll walk you through every step—from understanding your application to final testing—so you can be confident your end product won’t let you down. Reach out to our team to discuss your project, and let’s build a module that meets your vibration and shock needs.

Plastic Gear References
IEC 60068-2-6: Environmental testing – Part 2-6: Tests – Test Fc: Vibration (sinusoidal)
IEC 60068-2-27: Environmental testing – Part 2-27: Tests – Test Ea and guidance: Shock
Knight, M. (2019). Reliability of Electronic Assemblies Under Vibration and Shock. IEEE Transactions on Components, Packaging and Manufacturing Technology.
Bogatin, E. (2008). Board Level Reliability Handbook: Design, Analysis, and Testing. Electronic Design Series.


Ningbo Xinyu Automotive Electronics Co., Ltd.

Address: Zhujiadu Village, Sanqizhen, Yuyao City, Zhejiang Province
E-mail: xyautoelec@163.com
WebSite: https://www.xyautoelec.com/